Thyristors

            Thyristor

ANALOG THYRISTOR POWER CONTROLLERS HI - 8003-TP-C3-ED

Features

SOFT START & SOFT END: In the soft start, the output is given to the load in an exponential way. This character prevents excess inrush current to the heaters or transformers. This feature increases the life of the load. 

OVERLOAD TRIP: OVER-LOAD – the trip can be adjustable from 110% to 200% of the rated output value. If OVER-LOAD occurs the output is disabled. 

AUTOMATIC RESET: When OVER-LOAD – trip happens, after three seconds delay thyristor again starts normally and provides output. If OVER-LOAD – trip happens more than three times within 10 min, the output is disabled permanently.

RESET SWITCH: If any problem occurs in the output or input, and output is disabled, then hootter goes on. At this stage rectify the problem and press the reset switch.

ENABLE SWITCH: Optional Enable Switch is also provided.

Specifications:

System Input: 3 PHASE 415VAC with Neutral, 50 Hz

Mode of Control: Phase Angle Control

SCR Configuration: Full Converter Suitable for Phase Angle Control 

Type of Load: Resistive / Inductive

Power Handling: According to customer’s requirement (Maximum 100 KW)

Maximum Load Current: 300A

Controlling Input: 4-20mA(0-10VDC)

Type of Connection: Star / Delta

DIGITAL POWER CONTROLLERS - HI-8003-DP-C3

Features

SOFT START & SOFT END: In a soft start, the output is given to the load in an exponential way. This character prevents excess inrush current to the heaters or transformers. This feature increases the life of the load. 

OVERLOAD TRIP: OVER-LOAD – the trip can be adjustable from 110% to 200% of the rated output value. If OVER-LOAD occurs the output is disabled.   

AUTOMATIC RESET: When OVER-LOAD – trip happens, after three seconds delay thyristor again starts normally and provides output. If OVER-LOAD – trip happens more than three times within 10 min, the output is disabled permanently.

RESET SWITCH: If any problem occurs in the output or input, and output is disabled, then hootter goes on. At this stage rectify the problem and press the reset switch.

ENABLE SWITCH: Optional Enable Switch is also provided.

Description:

System Input: 3 PHASE 415VAC, 50 Hz

Mode of Control: Phase Angle Control

SCR Configuration: Full Converter Suitable for Phase Angle Control 

Type of Load: Resistive / Inductive

Power Handling: According to the customer’s requirement 

Maximum Load Current: 150 A

Controlling Input: 4-20mA(0-10VDC)

Type of Connection: Star / Delta

DIGITAL POWER REGULATOR - 2- PHASE, HI-8003M

Features

SOFT START & SOFT END : In soft start the output is given to the load in an exponential way. This character prevents excess inrush current to the heaters or transformers. This feature increases the life of the load. 

OVERLOAD TRIP : OVER-LOAD – trip can be adjustable from 110% to 200% of the rated output value. If OVER-LOAD occurs the output is disabled.   

AUTOMATIC RESET : When OVER-LOAD – trip happens, after three seconds delay thyristor again starts normally and provides output. If OVER-LOAD – trip happens more than three times within 10 min, the output is disabled permanently.

RESET SWITCH : If any problem occurs in the output or input, and output is disabled, then hootter goes on. At this stage rectify the problem and press the reset switch.

ENABLE SWITCH : Optional Enable Switch is also provided.

Description:

System Input: 2 PHASE 440VAC ±10%  50 Hz

Mode of Control: Phase Angle Control

SCR Configuration: Full Converter Suitable for Phase Angle Control 

Type of Load: Resistive / Inductive

Power Handling: According to customer’s requirement (Maximum : 30KW)

Maximum Load Current: 50 A

Controlling Input: 4-20mA(or 0-10VDC)

HI - 8003A40 - ANALOG THYRISTOR POWER CONTROLLER

Features

SOFT START & SOFT END: In soft start the output is given to the load in an exponential way. This character prevents excess inrush current to the heaters or transformers. This feature increases the life of the load. 

OVERLOAD TRIP: OVER-LOAD – trip can be adjustable from 110% to 200% of the rated output value. If OVER-LOAD occurs the output is disabled.   

AUTOMATIC RESET: When OVER-LOAD – trip happens, after three seconds delay thyristor again starts normally and provides output. If OVER-LOAD – trip happens more than three times within 10 min, the output is disabled permanently.

RESET SWITCH: If any problem occurs in the output or input, and output is disabled, then hootter goes on. At this stage rectify the problem and press the reset switch.

ENABLE SWITCH: Optional Enable Switch is also provided.

Specification:

System Input: 1 PHASE 230VAC ±10%  50 Hz

Mode of Control: Phase Angle Control

SCR Configuration: Full Converter Suitable for Phase Angle Control 

Type of Load: Resistive / Inductive

Power Handling: According to customer’s requirement (Maximum : 5KW)

Maximum Load Current: 50 A

Controlling Input: 4-20mA(or 0-10VDC)

THYRISTOR BASED DIGITAL POWER CONTROLLER - HI-8003M

Features

SOFT START & SOFT END: In soft start the output is given to the load in an exponential way. This character prevents excess inrush current to the heaters or transformers. This feature increases the life of the load. 

OVERLOAD TRIP: OVER-LOAD – trip can be adjustable from 110% to 200% of the rated output value. If OVER-LOAD occurs the output is disabled.   

AUTOMATIC RESET: When OVER-LOAD – trip happens, after three seconds delay thyristor again starts normally and provides output. If OVER-LOAD – trip happens more than three times within 10 min, the output is disabled permanently.

RESET SWITCH: If any problem occurs in the output or input, and output is disabled, then hootter goes on. At this stage rectify the problem and press the reset switch.

ENABLE SWITCH: Optional Enable Switch is also provided.

Specification:

System Input: 1 PHASE 230VAC ±10%  50 Hz

Mode of Control: Phase Angle Control

SCR Configuration: Full Converter Suitable for Phase Angle Control 

Type of Load: Resistive / Inductive

Power Handling: According to customer’s requirement (Maximum : 5KW)

Maximum Load Current: 40 A

Controlling Input: 4-20mA(or 0-10VDC)