High Density Cartridge Heaters

           High Density Cartridge Heaters

HEATCON High Density Cartridge Heaters are manufactured using the best materials and construction methods. Extensive Quality & Testing throughout the production process assures the continuous and superior performance of the heaters.

The swaged assembly produces a highly compacted heater that will have the ability for maximum element life &uniform heat transfer. These heaters last up to 10 times longer than normal un-compacted cartridge heaters.

Special Features:

  • OUTER SHEATH: SS 304/INCOLY/INCONEL 600/SS 310/SS 321/SS316/BRASS
  • RESISTANCE WIRE:- NICHROME 80/20
  • PINS: 100 6 PURE NICKEL
  • INSULATION: MGO
  • SEALING: CEMENT/SILICON/TEFLON.
  • LEAD WIRES: TEFLON/SS BRAIDED/FIBERGLASS INSULATED.

Cartridge heater compacted by magnesium oxide offers high performance. With a maximum rating of Wattage up to 70 Watts/Square inch & Temperature up to 750°C on the sheath of the heater.

Power distribution & Inbuilt Thermocouple options are available.

Features:

  • Standard Diameters 6.5,8,9.5,10,12.5,16,19.20,22,25mm.
  • Tolerance in Diameter: ±0.05mm.
  • Length: 30mm-1500mm.
  • Tolerance in Length: ±1.5%
  • Min Max Voltage: 480V.
  • Wattage Tolerance ±10%.

Application:

  • Liquid Immersion.
  • Plastic Molds
  • Dies
  • Labeling
  • Medical Equipment
  • Packaging Equipment
  • Hot Stamping.
  • Sealing
  • Injection Molding
  • Hot Runner